






| Operating Principle | A large-area marking layer delineates zones, often in combination with a base coat (sealer/topcoat). |
| Delimitation | Greater surface area-greater wear; therefore, mechanical reserve and maintenance strategy are critical to the design. |
| Typical Uses | Storage Space, Picking Zones, Buffer Zones, Restricted Areas |
| Decision Parameters | Industry-specific field | Relevance to Interpretation |
|---|---|---|
| Percentage of Area | local to widespread | Wear and maintenance costs are rising |
| Coating thickness (typical) | approx. 0.3-0.8 mm | Resistance to Scrubbing |
| Substrate Protection | optional (topcoat) | Prevents seepage/dirty edges |
| Edge/Border Guidance | masked/cropped | Precision in Future Repairs |
| Traffic Management | Separate Lanes for Vehicles and Pedestrians | The marking must not cause a "slip change" |
| Closing Hours | bar by bar | Zone Release During Operation |
| Operating Principle | A thin-film marking with a defined adhesive bond, designed to withstand regular cleaning and traffic loads. |
| Delimitation | No surface coating; the condition of the substrate has a greater impact on durability than the choice of color. |
| Typical Uses | Tracks, Sidewalks, Crosswalk Logic, Guidelines |
| Decision Parameters | Industry-specific field | Relevance to Interpretation |
|---|---|---|
| Line width | approx. 50-150 mm | Visibility vs. Area Share |
| Coating thickness (typical) | approx. 0.2-0.6 mm | Wear Reserve in Traffic Zones |
| Traffic Profile | Foot to forklift axles | Marking System Based on Load Group |
| Cleaning Chemicals | defined | Film Formation/Prevent Dissolution |
| Background | low-porosity, load-bearing | Adhesion with a Thin Coat |
| Edge quality | sharp/clean | Fraying reduces usability |
| Operating Principle | Multi-layer application with a defined contour, often with a protective topcoat to ensure that the edges of the symbols remain intact despite abrasion. |
| Delimitation | Higher level of detail → Edge and topcoat logic are crucial. |
| Typical Uses | Arrows, Numbering, Hazard Zones, Parking Space Markings |
| Decision Parameters | Industry-specific field | Relevance to Interpretation |
|---|---|---|
| Level of detail | low to high | Multi-layer structure required |
| Topcoat | often useful | protects contours from abrasion |
| Cleaning Profile | regularly | Edges must not be "undermined" |
| Surface roughness | low to moderate | affects the stencil image |
| Repairability | defined | Subsequent modifications without a complete overhaul |
| Clocking | short, segmented | Implementation Without a Complete Shutdown |
| Operating Principle | Quick-response marking for short closure times, particularly along logistics corridors. |
| Delimitation | Process control (section, ventilation, temperature) is key; the substrate must be prepared. |
| Typical Uses | Goal Lines, Tracks, Bottlenecks with no detour |
| Decision Parameters | Industry-specific field | Relevance to Interpretation |
|---|---|---|
| Time window | about 2-6 hours | determines the section length |
| Opening to Traffic | step by step | Base/Transport/Forklift Separate |
| Coating thickness | light to moderate | Wear Reserve Despite Short Cycles |
| Environment Tour | Ventilation/Temperature | Reaction Stability |
| Edge quality | high | otherwise, premature wear on the contours |
| Transitions | without edge joints | Do not create a "marking edge" |




